Room EQ Wizard Training

Lessons

Lesson 1: Signal Fundamentals

This lesson introduces the concept of a signal in REW. It covers the parameters that define the signal and how they affect the measurement accuracy, including sample rates, resolution, full scale, and their implications for frequency analysis.

Graph: Sample Rate and Half-Frequency

Deeper Detail: Signal Characteristics and Their Impacts

A signal in REW is a sequence of electrical measurements at the audio interface input. These measurements are then processed to provide insights into the frequency content of the room and the system being tested.

  • Sample Rate: The sample rate determines how many samples per second are captured. Common values include 44.1 kHz and 48 kHz. The highest frequency that can be captured is half the sample rate, which is essential for avoiding aliasing.
  • Resolution: Defined by bit depth and FFT length. Higher resolution allows for more accurate low-level details but may reduce time-domain analysis capabilities. Bit depths of 16 bits or higher are recommended to minimize quantization noise.
  • Full Scale (FS): The maximum digital level an interface can capture or output. Signals exceeding FS are clipped, leading to distorted measurements and potential damage to the system being tested. It is crucial to ensure that no signal exceeds this limit during measurement.

Quiz: Signal Parameters Understanding



This lesson focuses on the foundational aspects of signal processing. It assumes familiarity with REW's interface and the basic measurement workflow, making it suitable for users transitioning from beginner to intermediate levels.