Lessons
Lesson 1: Signal Fundamentals
This lesson covers the basics of signal processing in REW. It focuses on the key concepts that define the signal and measurement in audio systems, including sample rates, resolution, full scale, and how these affect the accuracy of frequency measurements.
Graph: Sample Rate and Half-Frequency
Deeper Detail: Signal Characteristics and Their Impacts
The signal in REW is a sequence of electrical measurements at the audio interface input. These measurements are then processed to provide insights into the frequency content of the room and the system being tested.
- Sample Rate: Determines how many samples per second are captured. Common values include 44.1 kHz and 48 kHz. The highest frequency that can be captured is half the sample rate, which is essential for avoiding aliasing.
- Resolution: Defined by bit depth and FFT length. Higher resolution allows for more accurate low-level details but may reduce time-domain analysis capabilities. Bit depths of 16 bits or higher are recommended to minimize quantization noise.
- Full Scale (FS): The maximum digital level an interface can capture or output. Signals exceeding FS are clipped, leading to distorted measurements and potential damage to the system being tested. It is crucial to ensure that no signal exceeds this limit during measurement.
Quiz: Understanding Signal Parameters
This lesson assumes familiarity with REW's interface and the basic workflow of conducting a measurement. It provides a foundational understanding of signal characteristics and their effects on frequency analysis.
Lesson 2: Spectrum and FFT
This lesson explores the concepts of spectrum, FFT, and RTA. It covers how REW uses these tools to analyze the frequency content of a room, interpret the results, and apply them for EQ adjustments.
Graph: FFT Frequency Resolution
Deeper Detail: Spectrum, FFT, and RTA in Audio Systems
The spectrum of a signal represents the frequency components that make up the signal. REW uses the FFT (Fast Fourier Transform) to convert this time-domain signal into a frequency domain spectrum, which shows the amplitude and phase of each frequency component.
- FFT Resolution: The resolution in frequency is calculated as `sample rate / FFT length`. Longer FFTs provide better low-frequency resolution but worse time resolution. This means that when analyzing a system's response, the choice of FFT length affects the clarity of both frequency and time components.
- RTA (Real-Time Analyzer): REW's RTA provides a live fractional-octave spectrum. It is particularly useful for EQ adjustments because it allows for real-time analysis of the system's frequency response. Unlike traditional sweeps, which require playback and capture, RTA can be used while the system is active, making it ideal for live testing.
Quiz: FFT and RTA in Practice
This lesson focuses on the practical applications of the FFT and RTA. It is designed for users who have already been introduced to REW's measurement process and are ready to interpret the results more deeply.
Lesson 3: Transfer Functions and Impulse Responses
This lesson delves into the concepts of transfer functions and impulse responses. It explains how these tools are used to characterize the system's behavior, including the frequency response and phase response, which are essential for accurate EQ adjustments.
Graph: Transfer Function Frequency Response
Deeper Detail: Understanding System Characteristics through Transfer Functions
A transfer function is a complete description of how a system changes the amplitude and phase of each frequency. It consists of two parts: the frequency response, which describes the magnitude changes, and the phase response, which describes the phase shifts.
- Frequency Response: How a system changes the amplitude of each frequency. This is crucial for identifying and correcting problematic frequencies in the room.
- Phase Response: How a system changes the phase of each frequency. A complete transfer function must include both magnitude and phase information to accurately represent system behavior.
Quiz: Transfer Function Interpretation
This lesson is tailored for users who have a working knowledge of the FFT and RTA. It provides an in-depth look at how transfer functions describe system behavior and their implications for EQ adjustments.
Lesson 4: Practical EQ Application and Measurement Validity
This lesson focuses on the practical application of EQ techniques in REW. It also discusses the important considerations of measurement validity, including source position, microphone placement, full scale settings, and other system-specific factors.
Graph: Measurement Validity Factors
Deeper Detail: Ensuring Accurate and Useful Measurements in REW
The accuracy of a measurement in REW is highly dependent on several factors, including the exact source position, microphone position, sample rate, bit depth, full scale settings, and other system-specific conditions. These variables influence the measurement's validity and the usefulness of the results for EQ adjustments.
- Measurement Validity: A measurement is valid only if the source position, microphone position, sample rate, bit depth, full scale settings, impulse-response window settings, and other parameters remain unchanged during the measurement. Even small movements can alter the response significantly, especially at high frequencies.
- Practical EQ Application: While EQ in REW is powerful for correcting broad peaks and taming modal resonances, it cannot fully address issues like non-minimum phase behavior or sharp dips caused by cancellation. It should be used in conjunction with other techniques such as speaker placement and acoustic treatment.
Quiz: Practical EQ Techniques
This lesson is designed for users who have a working knowledge of the signal and system characteristics discussed in earlier lessons. It emphasizes the importance of measurement validity and practical EQ techniques to achieve accurate results.